STABLE NATURAL GASOLINE
STO 98832933-005-2016
Table 1 – Stable natural gasoline quality
Parameter name Standard value Test method
1. Distillation: - initial boiling point, 0С, min.; - final boiling point, 0С, max.   30   185 GOST 2177 (A) or ASTM D 86
2. Reid vapour pressure, psi, max 12.5 ASTM D 323 (A) or GOST 1756
3. Mercaptan sulfur, %, max (mas.) 0.004 GOST R 52030 or UOP 163
4.   Sulfur, mg/kg, max. 500 ASTM D 4294 or GOST R 51859
5. Colour as per Saybolt, min 20 ASTM D 156
6. Density at 15 0С, kg/l, max 0.74 ASTM D 1298 or GOST R 51069
7. Lead content, mсg/kg (ppb), max 50 UOP 952 GOST 28828
8. Copper corrositivity 1b max. GOST 6321 or ASTM D 130
9. Hydrocarbon analysis: - paraffin content, %, min; - naphthenes, %; - aromatic, %; - olefins, %, min   60   Balance Balance 1 GOST R 52714 (method B) or ASTM D 5134  
10. MTBE (max) 50 GOST R 52531 (method B)
11. Hydrogen sulfide, mg/kg, min 10 UOP 163
12. Mass fraction of total chlorine, mg/kg, max 10 UOP 779
 

home

LOW POUR POINT FUEL
STO 98832933-009-2018
Table 1 – Low pour point fuel quality
Parameter name Standard value Test method
1.    Flash point determined in a closed cup, оС, min: 82 GOST 4333
2.   Sulfur, %, max. 1.0 GOST R 51947
3.   Pour point, оС, min Minus 36 GOST 20287-
4.   Colour Light yellow to light brown Visual
5.   Mass fraction of solids, %, min 0,02 GOST 6370
6.   Mass fraction of water, % Traces GOST 2477
7.   Density at 20 оС, kg/m3 Nonstandardized, subject to determination   GOST 3900
8.   Presence of depressor-dispersing additive, brand and quantity, % mass.
 
MIDDLE DISTILLATE OF GAS CONDENSATE
STO 98832933-007-2016
Table 1 – Quality of middle distillate of gas condensate
Parameter name Value Test method
1.  Density at 15 оС, kg/m3, max 860 GOST R 51069, ASTM D 4052
2.  Mass fraction of sulfur, %, max 1,00* GOST R 51947, ASTM D 4294
3.  Flash point determined in a closed cup, оС, min 55* GOST 6356, ASTM D 93/A
4.  Pour point, оС, max -5 GOST 20287, ASTM D 97
5.  Cinematic viscosity at 20 оС, mm2/s 2.0-12.0 GOST 33, ASTM D 445
6.  Cetane index, min   45 GOST 27768, ASTM D 976
7.  Copper corrosivity satisfactory GOST 6321 ASTM D 130
8.  Mechanical impurity content,% none GOST 6370 ASTM D 473
9.  Water content, mg/kg, max 500 GOST 2477, IP 439/calc.
Notes: 1)      Additional parameters may be determined in middle distillate of gas condensate upon agreement with a consumer and introduction of this information into a document of quality (certificate); 2)      *- this product quality parameter may be changed upon a consumer’s request.  
 
FUEL OIL 40, 1.00%, LOW-ASH, 250С
FUEL OIL 40, 1.50%, LOW-ASH, 250С
GOST 10585-2013
Table 1 – Fuel oil quality
Parameter name Value Test method
1.    Cinematic viscosity at 800С, mm2/s, max 59.00 GOST 33
2.    Ash content, %, max, for low-ash fuel oil 0.04 GOST 1461
3.    Mass fraction of mechanical impurities, %, max 0.5 GOST 6370
4.    Mass fraction of water, %, max 1.0 GOST 2477
5.    Water soluble acid and alkali content none GOST 6307 p.7.5 GOST 10585
6.    Mass fraction of sulfur, %, max 1.00 1.50 GOST R 51947
7.    Hydrogen sulphide content, ppm, max 10 GOST R 53716
8.    Flash point in an open cup, оС, min   90 GOST 4333
9.    Pour point, 0С, max, for high-paraffin fuel oil Plus 25 GOST 20287 (method B)
10.  Сalorific value (lower) calculated as dry fuel, kJ/kg, min 40740 GOST 21261
11.     Density at 150С, kg/m3, max Nonstandardized, subject to determination GOST R 51069
12.  Fractional yield boiling up to 3500С, %, max 17 ASTM D 1160

home

 

scroll to explore

STABLE NATURAL GASOLINE
STO 98832933-005-2016
Table 1 – Stable natural gasoline quality
Parameter name Standard value Test method
1. Distillation: - initial boiling point, 0С, min.; - final boiling point, 0С, max.   30   185 GOST 2177 (A) or ASTM D 86
2. Reid vapour pressure, psi, max 12.5 ASTM D 323 (A) or GOST 1756
3. Mercaptan sulfur, %, max (mas.) 0.004 GOST R 52030 or UOP 163
4.   Sulfur, mg/kg, max. 500 ASTM D 4294 or GOST R 51859
5. Colour as per Saybolt, min 20 ASTM D 156
6. Density at 15 0С, kg/l, max 0.74 ASTM D 1298 or GOST R 51069
7. Lead content, mсg/kg (ppb), max 50 UOP 952 GOST 28828
8. Copper corrositivity 1b max. GOST 6321 or ASTM D 130
9. Hydrocarbon analysis: - paraffin content, %, min; - naphthenes, %; - aromatic, %; - olefins, %, min   60   Balance Balance 1 GOST R 52714 (method B) or ASTM D 5134  
10. MTBE (max) 50 GOST R 52531 (method B)
11. Hydrogen sulfide, mg/kg, min 10 UOP 163
12. Mass fraction of total chlorine, mg/kg, max 10 UOP 779
 

scroll to explore

LOW POUR POINT FUEL
STO 98832933-009-2018
Table 1 – Low pour point fuel quality
Parameter name Standard value Test method
1.    Flash point determined in a closed cup, оС, min: 82 GOST 4333
2.   Sulfur, %, max. 1.0 GOST R 51947
3.   Pour point, оС, min Minus 36 GOST 20287-
4.   Colour Light yellow to light brown Visual
5.   Mass fraction of solids, %, min 0,02 GOST 6370
6.   Mass fraction of water, % Traces GOST 2477
7.   Density at 20 оС, kg/m3 Nonstandardized, subject to determination   GOST 3900
8.   Presence of depressor-dispersing additive, brand and quantity, % mass.
 

scroll to explore

MIDDLE DISTILLATE OF GAS CONDENSATE
STO 98832933-007-2016
Table 1 – Quality of middle distillate of gas condensate
Parameter name Value Test method
1.  Density at 15 оС, kg/m3, max 860 GOST R 51069, ASTM D 4052
2.  Mass fraction of sulfur, %, max 1,00* GOST R 51947, ASTM D 4294
3.  Flash point determined in a closed cup, оС, min 55* GOST 6356, ASTM D 93/A
4.  Pour point, оС, max -5 GOST 20287, ASTM D 97
5.  Cinematic viscosity at 20 оС, mm2/s 2.0-12.0 GOST 33, ASTM D 445
6.  Cetane index, min   45 GOST 27768, ASTM D 976
7.  Copper corrosivity satisfactory GOST 6321 ASTM D 130
8.  Mechanical impurity content,% none GOST 6370 ASTM D 473
9.  Water content, mg/kg, max 500 GOST 2477, IP 439/calc.
Notes: 1)      Additional parameters may be determined in middle distillate of gas condensate upon agreement with a consumer and introduction of this information into a document of quality (certificate); 2)      *- this product quality parameter may be changed upon a consumer’s request.  
 

scroll to explore

FUEL OIL 40, 1.00%, LOW-ASH, 250С
FUEL OIL 40, 1.50%, LOW-ASH, 250С
GOST 10585-2013
Table 1 – Fuel oil quality
Parameter name Value Test method
1.    Cinematic viscosity at 800С, mm2/s, max 59.00 GOST 33
2.    Ash content, %, max, for low-ash fuel oil 0.04 GOST 1461
3.    Mass fraction of mechanical impurities, %, max 0.5 GOST 6370
4.    Mass fraction of water, %, max 1.0 GOST 2477
5.    Water soluble acid and alkali content none GOST 6307 p.7.5 GOST 10585
6.    Mass fraction of sulfur, %, max 1.00 1.50 GOST R 51947
7.    Hydrogen sulphide content, ppm, max 10 GOST R 53716
8.    Flash point in an open cup, оС, min   90 GOST 4333
9.    Pour point, 0С, max, for high-paraffin fuel oil Plus 25 GOST 20287 (method B)
10.  Сalorific value (lower) calculated as dry fuel, kJ/kg, min 40740 GOST 21261
11.     Density at 150С, kg/m3, max Nonstandardized, subject to determination GOST R 51069
12.  Fractional yield boiling up to 3500С, %, max 17 ASTM D 1160

replay

home

 

scroll to explore

STABLE NATURAL GASOLINE
STO 98832933-005-2016
Table 1 – Stable natural gasoline quality
Parameter name Standard value Test method
1. Distillation: - initial boiling point, 0С, min.; - final boiling point, 0С, max.   30   185 GOST 2177 (A) or ASTM D 86
2. Reid vapour pressure, psi, max 12.5 ASTM D 323 (A) or GOST 1756
3. Mercaptan sulfur, %, max (mas.) 0.004 GOST R 52030 or UOP 163
4.   Sulfur, mg/kg, max. 500 ASTM D 4294 or GOST R 51859
5. Colour as per Saybolt, min 20 ASTM D 156
6. Density at 15 0С, kg/l, max 0.74 ASTM D 1298 or GOST R 51069
7. Lead content, mсg/kg (ppb), max 50 UOP 952 GOST 28828
8. Copper corrositivity 1b max. GOST 6321 or ASTM D 130
9. Hydrocarbon analysis: - paraffin content, %, min; - naphthenes, %; - aromatic, %; - olefins, %, min   60   Balance Balance 1 GOST R 52714 (method B) or ASTM D 5134  
10. MTBE (max) 50 GOST R 52531 (method B)
11. Hydrogen sulfide, mg/kg, min 10 UOP 163
12. Mass fraction of total chlorine, mg/kg, max 10 UOP 779
 

scroll to explore

LOW POUR POINT FUEL
STO 98832933-009-2018
Table 1 – Low pour point fuel quality
Parameter name Standard value Test method
1.    Flash point determined in a closed cup, оС, min: 82 GOST 4333
2.   Sulfur, %, max. 1.0 GOST R 51947
3.   Pour point, оС, min Minus 36 GOST 20287-
4.   Colour Light yellow to light brown Visual
5.   Mass fraction of solids, %, min 0,02 GOST 6370
6.   Mass fraction of water, % Traces GOST 2477
7.   Density at 20 оС, kg/m3 Nonstandardized, subject to determination   GOST 3900
8.   Presence of depressor-dispersing additive, brand and quantity, % mass.
 

scroll to explore

MIDDLE DISTILLATE OF GAS CONDENSATE
STO 98832933-007-2016
Table 1 – Quality of middle distillate of gas condensate
Parameter name Value Test method
1.  Density at 15 оС, kg/m3, max 860 GOST R 51069, ASTM D 4052
2.  Mass fraction of sulfur, %, max 1,00* GOST R 51947, ASTM D 4294
3.  Flash point determined in a closed cup, оС, min 55* GOST 6356, ASTM D 93/A
4.  Pour point, оС, max -5 GOST 20287, ASTM D 97
5.  Cinematic viscosity at 20 оС, mm2/s 2.0-12.0 GOST 33, ASTM D 445
6.  Cetane index, min   45 GOST 27768, ASTM D 976
7.  Copper corrosivity satisfactory GOST 6321 ASTM D 130
8.  Mechanical impurity content,% none GOST 6370 ASTM D 473
9.  Water content, mg/kg, max 500 GOST 2477, IP 439/calc.
Notes: 1)      Additional parameters may be determined in middle distillate of gas condensate upon agreement with a consumer and introduction of this information into a document of quality (certificate); 2)      *- this product quality parameter may be changed upon a consumer’s request.  
 

scroll to explore

FUEL OIL 40, 1.00%, LOW-ASH, 250С
FUEL OIL 40, 1.50%, LOW-ASH, 250С
GOST 10585-2013
Table 1 – Fuel oil quality
Parameter name Value Test method
1.    Cinematic viscosity at 800С, mm2/s, max 59.00 GOST 33
2.    Ash content, %, max, for low-ash fuel oil 0.04 GOST 1461
3.    Mass fraction of mechanical impurities, %, max 0.5 GOST 6370
4.    Mass fraction of water, %, max 1.0 GOST 2477
5.    Water soluble acid and alkali content none GOST 6307 p.7.5 GOST 10585
6.    Mass fraction of sulfur, %, max 1.00 1.50 GOST R 51947
7.    Hydrogen sulphide content, ppm, max 10 GOST R 53716
8.    Flash point in an open cup, оС, min   90 GOST 4333
9.    Pour point, 0С, max, for high-paraffin fuel oil Plus 25 GOST 20287 (method B)
10.  Сalorific value (lower) calculated as dry fuel, kJ/kg, min 40740 GOST 21261
11.     Density at 150С, kg/m3, max Nonstandardized, subject to determination GOST R 51069
12.  Fractional yield boiling up to 3500С, %, max 17 ASTM D 1160

replay

home